Adelaide, Enfield / Somerton Park / Elizabeth South
Tint Bros fits dashcams, lighting, and vehicle accessories with concealed, OEM-style wiring, so your upgrades work reliably and look factory-fitted rather than aftermarket.
Adding electronics to a modern car is easy to do badly. A cheap install leaves dangling cables, a drained battery, or blown fuses down the track. We take the careful route: correct power sources, proper fusing, and wiring routed and secured so it holds up to daily driving.
Your accessory should work every time, draw power safely, and look like it left the factory that way.
On many modern vehicles the wiring ties into sensitive electronics, so a sloppy tap into the wrong circuit can throw errors or drain the battery while the car is parked. We choose the right circuits and fuse them correctly so nothing else gets disturbed.
Hardwired
A hardwired dashcam is the tidiest way to run one. Instead of a cable trailing from the cigarette socket, we wire it into the fuse box so it powers on with the car and can support parking mode, with the lead tucked neatly behind the trim.
Supply or BYO
We can supply a camera or fit one you already own, front only or front and rear, and set it up so it works the moment you get in and drive.
Parking mode
If you want parking mode, we can wire the camera through a battery-protection cutoff so it keeps watch while you are away without flattening the battery, and we will set the recording and sensitivity to suit how you use the car.
From auxiliary and light-bar wiring to reversing cameras, sensors, and other accessories, we handle the electrical side so your upgrade is powered correctly and switched cleanly.
Every job is done with the right connectors and fusing, not scotch-locks and tape, so it is reliable and easy to service later. If you are not sure whether something can be fitted to your vehicle, ask us.
Common jobs include reverse cameras and parking sensors on older cars, driving lights and light bars on four-wheel drives, and tidy power for phone mounts, radios, and other accessories. Whatever it is, we make sure it draws from the right place and switches cleanly.
The difference between a professional install and a backyard one is what you cannot see. We route cabling behind panels and along factory looms, secure it so it does not rattle or chafe, and leave no exposed runs across the cabin.
A clean loom does more than look tidy. Wiring routed and protected the right way lasts longer and is far less likely to cause faults down the road.
We also route and secure everything so the next person who works on the car can follow it, rather than finding a tangle behind the dash.
The tidy-install standard
Routed. Behind panels and along factory looms
Secured. No rattle, no chafe, no exposed runs
Fused. Correct power sources, fused properly
Serviceable. The next person can follow the loom
Because we are already fitting tint, PPF, and coatings, an electrical job slots neatly into the same visit. Book your dashcam or accessory install with your tint and collect the car sorted in one go.
It saves you a second trip and keeps everything with one team that treats your car with care, from the glass to the wiring. One booking, one drop-off, and the car comes back with the tint, the protection, and the electrical work sorted together.
Tint Bros has served Adelaide drivers since 2020, and our accessory installs get the same tidy, careful approach as our film work. Our team has wired cameras, lights, and accessories across all sorts of vehicles, so the work comes back neat and it holds up. Experienced hands, correct methods, and a finish that respects your vehicle.
Book at Enfield, Somerton Park, or Elizabeth South, or ask about adding electrical work to a tint or protection booking. If you are unsure whether a particular accessory suits your vehicle, send us the details and we will tell you what is involved before you commit.
The short version
The difference between a professional install and a backyard one is what you cannot see.
Dashcams, lighting, and tidy accessory installs.
Certified installers
The same in-house team across all three workshops
Workmanship warranty
Recorded against your booking, not a film
ZipPay available
Buy now, pay later in store
Yes. A hardwired dashcam is wired into the fuse box so it powers on with the car, with the lead tucked neatly behind the trim instead of trailing from the cigarette socket. For parking mode we wire the camera through a battery-protection cutoff, so it keeps watch while you are away without flattening the battery.
Yes, and it is the easiest way to do it. Because we are already fitting tint, PPF and coatings, a dashcam or accessory install slots neatly into the same visit: one booking, one drop-off, and the car comes back with the tint, the protection and the electrical work sorted together.
Dashcams, lighting, and tidy accessory installs.